Andon International Group Co., Ltd

uProduct Features 1.To use matching with the original bright dipping tack,be faster. 2.Very good bright dipping effect, low cost, low pollution, raw material consuming less. 3.No toxic metal ion. uTank set up parameters H2SO4：150g/L JB-DT02: 20~30g/l uControlling parameters Free Acid:...

uProduct Features Could shorten the anodizing time,to cut down the energy-consuming,& also could bring about hard anodizing film,improve the color average,This produt would never occur "yellow" surface,spot & other defects. uTank set up parameters Sulfuric acid ：150～220g/l JB-A02：60~80g/

uProduct Features 1.Complex mixture liquid, antioxidant potential regulation agent, a multifunctional oxidation coloring additives. 2.Component of unique dispersing agent, brightener, let the performance of Bath stable , with good dispersion and disperse reproducibility, An even oxidation...

uProduct Features 1.It's easy for dripping when the product out of the bath if use appropriate of the surface activation agent and corrosion inhibitor, and effectively prevent the flow marks. 2. Complexed with appropriate leveling agent, corrosion inhibitor, and brighteners, after treatment the...

uProduct Features 1.It can work in the range of 18-35 ℃ and do not refrigeration, you can use tap water . 2.Oxidation current can work in the range of 1.0-3.0A/dm2。 3.The tolerance of AL3 +, Cu2 +, Fe3 +is more than one time. Oxidation rate also increased to 0.4~1.0μm/min。 uTank set up...

uProduct Features 1.Complexed with appropriate leveling agent, corrosion inhibitor, and brighteners, after treatment the substrate body is brightness, smooth, and clean. 2. To treatment the sand surface, it will special light and bleaching. The process is very simple. 3. It's easy to operate,...

uProduct Features 1.It's easy for dripping when the product out of the bath if use appropriate of the surface activation agent and corrosion inhibitor, and effectively prevent the flow marks. 2. Complexed with appropriate leveling agent, corrosion inhibitor, and brighteners, after treatment the...

uProduct Features 1.JB-B02 is the chemical polishing additive agent for phosphoric acid, sulfuric acid, nitric acid. 2.Improved the surface reflectivity of polishing surface. Eliminate the slight spot and trace on surface. The acid flow trace is restrained. 3.Compared with the traditional three...

uProduct Features 1.JB-B03 is the chemical polishing additive agent for electrolysis polishing based on phosphoric acid system. Easily to maintenance, stable surface polishing quality, easily obtained the perfect gloss 2.High reflectivity on surface. 3.No Nitric acid and Heavy Metal ion, avoid...

uProduct Features 1.Applicable to degreaser ,as polishing oil, vegetable oil, mineral oil, are very easy cleansing . 2.Degreaser-SA can be used for chemical polishing, electrolytic polishing, alkaline / acid before etching. 3.No need to setup a new bath, you can added it directly to use on the...